GLOBAL CORPORATION
Kinematic Viscosity Bath

Kinematic Viscosity Bath

Send Inquiry

With the help of our technically profound professionals, we are able to manufacture, supply and export Kinematic Viscosity Bath. Integrated with advanced features such as built-in stirrer, digital display to view bath temperature and low bath level protection, our products are widely appreciated among clients. The entire range is rigorously checked at our in-house built testing unit so that any defective product can be removed before the final delivery. Kinematic Viscosity Bath is demanded throughout the world for the below mentioned features:

  • Safe to use

  • Simpler operations

  • Uniform temperature

  • Fast cooling

Additional information:

ASTM D 445 ; IP 71 ; DIN 51562 ; ISO 3104 ; IS-1206 (Part III)-1978.
Highly stable viscosity bath temperatures.
Digital measurement and display.

The Viscosity Bath is designed to simplify ASTM D 445; IS-1206 (Part III)-1978 kinematic viscosity testing. A top-mounted controller keypad permits quick entry of bath set point temperature while a sophisticated microprocessor controls the bath heating and stirring. To further enhance the input, the unit accommodates up to a maximum of six individual capillaries.

The HVB features a measuring range of 5ºC to 230ºC and can be used with mineral oil, silicone oil, or water as the bath media. Bath temperature is displayed on a bright, easy-to-read digital display. In addition, the unit features a built-in over-temperature circuit and bath liquid level detector to automatically cut heater power in the event of thermal runaway or insufficient bath media.

Features:

  • Accommodates up to six capillary tubes; optional Cannon-Fenske or canon- menin tube holders available

  • Measures kinematic viscosity of petroleum products at temperatures from 20ºC to 150ºC, according to ASTM D 445; IP 71 ; DIN 51562 ; ISO 3104 ; IS-1206 (Part III)-1978

  • Controls bath temperature with ±0.01ºC stability

  • Digital bath temperature measurement and display

  • Large capacity bath with built-in stirrer, optional illumination

  • Integral over-temperature and low bath level protection

The unit has a double walled construction with outer GI /MS powder coat finish & argon welded inner of SS 304, having glass wool insulation between the walls. A motor with stirrer is provided for better temperature uniformity. Toughened glass window from both sides with fluorescent tube for easy visualization. The SS immersion heater does the heating. Digital temperature controller cum indicator controls the process. Cooling of bath is achieved by sealed CFC free compressor & direct copper tubing inside the inner area for fast & accurate cooling.


Internal dimensions(LxWxD) Capacity Ltrs.
Heating:
1. 25x20x30 cms for 5°C above ambient to 230 °C.
4VM 12 Ltrs.
2. 35x20x30 cms for 5°C above ambient to 230°C
6VM 18 Ltrs.
Cooling:
3. 25x20x30 cms for 5°C to 95°C
4VM 12 Ltrs.
4. 35x20x30 cms for 5°C to 95°C
6VM 18 Ltrs.